Error 0xFFFF34DE when attempting to use camera via NI MAX

[PP-Koehlers]

Hey everyone,

I am currently working on using a USB3 camera through LabView but ran into the following issue:

At first the available drivers didn't function with the camera with the message Error 0XBFF69002 popping up, which I fixed by figuring out that the imaqdx.dll version didn't fit with my current system version, deleting it and un- and reinstalling VAS, as suggested here: https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000kFXMSA2&l=de-DE

Now it appears that the driver functions. However, when I try to Snap or Grab a picture in NI Max, I get the message Error 0xFFFF34DE


Similarily, I get an Error trying to use the camera through LabView.

Here's what I'm using:

LabView 2017
imaqdx 17.1
camera: Allied Vision U-511m (USB3)

Hope anybody has an idea what's wrong and thanks in advance for any answers!

[Andrey_Dmitriev]

As very first suggestion I would like to recommend to upgrade Vision Acquisition Software/IMAQdx to the highest possible version compatible with your LabVIEW. Some USB3-related issues was fixed since v.17.

Unfortunately NI didn't provided info about old LabVIEW 2017 in the Compatibility Chart, but try starting from the latest available based on your license version.