NI-IMAQdx is missing from Vision and Motion

[vitya]

Dear Members,

I have a image processing project which would be very important for me to finish. However, I do not find NI-IMAQdx option in the Vision and Motion toolbar (I attached a picture about it). I use LabView 2014 (32-bit) and I also installed NI Vision Acquisition Software 18.5 which I thought will solve my problem but it didn't. I also checked the licenses and all of them are activated.

Another problem which I believe is connected to the above mentioned one is that when I want to open a camera with Vision Acquisition, LabView does not find some VI-s on the computer and therefore it's not working. I attached some pictures about it. 

Does anyone has any idea what should I do to make NI-IMAQdx to work? I would really appreciate if someone could help me out. Thanking you in advance yor your time and assistance.

 Best regards,

vitya

[kensign]

Hi Vitya,

The problem is that Vision Acquisition Software (which includes NI-IMAQdx) 18.5 does not have support for LabVIEW 2014. Any VAS release is compatible with the 4 latest major versions of LabVIEW. For 18.5, this means LabVIEW 2018, 2017, 2016, and 2015. You'll need either a newer version of LabVIEW, or an older version of VAS (<=17.5).

Hope this helps,

Katie

[AlynCuY]

Hi Vitya,

For future reference, you can find the compatibility chart here: https://www.ni.com/en/support/documentation/compatibility/17/vision-acquisition-software-and-labview...

Also, you can find info about LabVIEW support in the Vision Acquisition Software's readme file

[vitya]

Thank you so much for both of your quick response and help.