Rif.: Vision Builder for Automated Inspection and Siemens PLC s7-1200

[Irony]

How can i transfer the result of Vision Builder's inspection to Siemens PLC s7-1200 using a serial communication? Maybe going through LabView? Thanks. 

[LiciaP · Accepted solution]

Hi,

you can implement serial communication directly from Vision Builder using "Serial I/O" step in the Communicate palette.

Using "Send Command" button, you can also send the steps results through serial port.

Bye!

Licia

[Rodolfo75]

I have a similar doubt; I need send commands to meter and power supply using an Ethernet cable, how can I do this?, please share an example

[PCopjan]

Hi, you can use TCP communication. In my case, PLC was server. Used TSEND_C and TRCV_C functions.

In VBAI I did setup TCP client ( tools, Communication device manager) and was able to send and receive with the function TCP I/O