6115 error -200842

[anjames]

Trying to use PXI-6115 Digital triggering... getting error that  device doesn't support :

DAQmxSetStartTrigType(taskHandle, DAQmx_Val_DigEdge));

or

DAQmxErrChk (DAQmxSetRefTrigType(taskHandle, DAQmx_Val_DigPattern));

Even tried the ANSI C examples with same results...Although documentation indicates that this is supported.

Any suggestions

[JÞB]

Error -200842 occurred at an unidentified location

Possible reason(s):

Data Transfer Mechanism is not set to Programmed I/O, the only value supported when the Sample Mode is Hardware Timed Single Point.

Set your Data Transfer Mechanism to Programmed I/O or change the Sample Mode.

So, what are the other settings?