I am trying to use a NI USB 6009 so I am installing NI-VISA 4.5.0 as a prerequisite to DAQmx Base. I get the following error:
Warning: nikali post installation failed! /tmp/nikaliPostInstall.log follows:
And farther down:
./uninstall.sh: line 13: .: Makefile.in: file not found
Uninstalling NI-KAL (nikal): done
/bin/rm -rf objects
Updating NI-KAL:
NI-KAL update failed.
/bin/cp nikal.c objects/nikal.c
/bin/cp nikal.h objects/nikal.h
make -C /lib/modules/2.6.31.12-0.2-default/source SUBDIRS=/usr/local/natinst/nikal/src/objects modules
make[1]: Entering directory `/usr/src/linux-2.6.31.12-0.2'
CC [M] /usr/local/natinst/nikal/src/objects/nikal.o
Building modules, stage 2.
MODPOST 1 modules
WARNING: "init_mm" [/usr/local/natinst/nikal/src/objects/nikal.ko] undefined!
CC /usr/local/natinst/nikal/src/objects/nikal.mod.o
LD [M] /usr/local/natinst/nikal/src/objects/nikal.ko
make[1]: Leaving directory `/usr/src/linux-2.6.31.12-0.2'
Installing NI-KAL (nikal): Starting NI-KAL failed!
make: *** [install] Error 1
ERROR: make of nikal kernel module failed, not installing kernel module.
updateNIDrivers should be called again after fixing the problem.
Logging failure...
Include the file /tmp/niSystemReport.out.gz when contacting
National Instruments for support.
Some details about my system:
uname -r
2.6.31.12-0.2-default
rpm -qa |grep ^ni
niorbi-1.9.0-f0.i386
nivisaserver-4.5.0-f0.i386
nimdnsresponder-1.1.0-f2.i386
nivisa-4.5.0-f0.i386
nirpci-4.0.0-f1.i386
nipalki-2.4.0-f0.i386
nivisak-4.5.0-f0.i386
nivisa-config-4.5.0-f0.i386
nicvirte-8.0-7.i386
nidimi-1.9.2-f0.i386
nispyi-2.6.0-f0.i386
nikali-1.9.0-f0.noarch
nipxirmi-1.6.0-f0.i386
nipali-2.4.0-f0.i386
nivisa-devel-4.5.0-f0.i386
lsmod |grep ni
NOTHING?
I am attaching niSystemReport output.
Thank
you very much for any help you can provide. After many hours trying
different things I've found in the forums I am totally stuck.
