08-29-2016 07:39 PM
Hello,
Is there a table showing the ENOB vs sampling rate for NI6361 DAQ? if not, I am interested in the ENOB at 10k, 50k, 100k, 200k sps.
Thanks
08-30-2016 04:59 PM
KarlLi,
NI does not spec the ENOB for our DAQ devices, so there isn't any table like you are looking for. Instead, you can find the spec for the absolute accuracy of the device. This document provides guidance on calculating the ENOB:
http://www.ni.com/white-paper/3359/en/
J. Calvert
Applications Engineering
National Instruments
08-30-2016 05:00 PM
KarlLi,
NI does not spec the ENOB for our DAQ devices, so there isn't any table like you are looking for. Instead, you can find the spec for the absolute accuracy of the device. This document provides guidance on calculating the ENOB:
http://www.ni.com/white-paper/3359/en/
J. Calvert
Applications Engineering
National Instruments