PCIe replacement for USB 6211 OEM

[FabriceMTL]

Hi y'all,

We want to change our design to use PCIe data acquisition card since we had some USB driver issue in the past. Is the PCIe-6321 a good match to replace the USB-6211-OEM acquisition card?

Are there better alternative?

Thanks,

Fabrice

[AlexAlligator · Accepted solution]

Hello Fabrice,

Thank you for taking an interest in our PCIe line of DAQ cards. I've taken a look at the USB-6211-OEM and the PCIe-6321 to see if they are similar in specifications and capabilities. I would say that the 6321 is a good match to replace your current USB card. As long as you intend to not use more I/O lines than intended or exceed the designated sampling speed then it should be a good replacement.

If you need high-speed sampling or more I/O lines for various tasks then another card may better suit your needs.

The resource below compares several of our X Series devices (USB and PCIe).

What is NI X Series? - 1. Product Overview

---

These links may also prove helpful during your upgrade:

Major Differences Between E Series, M Series, and X Series NI DAQ Devices

---

NI X Series Upgrade Guide (from USB to USB devices however)

---

Regards,
Alex C.

[FabriceMTL]

Thanks for your reply Cicco