USB-1616HS-4 shows voltage on digital input

[RickyG]

First Post:

I have a USB-1616HS-4. It shows 3.3v on pins C4 and C5 which are configured as digital input and with nothing connected to those pins.  C0 to C3 and C6 to C7 do not show a voltage value.  This is with nothing attached.  Is this correct behavior or am I lost more than I thought?  I'm pretty new to DAQ in general, so I'm assuming there is something simple I am unaware of.  

Project:  I am updating an old inspection program that was written in VB6 and used a DAQBook/100 over a parallel port to collect data.  I'm using Vb.Net and the above mentioned USB-1616HS-4.  

Any hints or help would be most appreciated.

Thanks

Rick

[bstreiff · Accepted solution]

The USB-1616HS-4 is a Measurement Computing product. You will probably get better support going through their support resources.

[RickyG]

Well, not quite the answer I had hoped, and maybe a little embarrassing for me and my internet navigation skills.  But it is probably the most useful one I was going to get here.  🙂

Thanks