rearm time of PCI-6111 compare to USB-6251

[skim150]

Hi 

We have been using USB-6251 for voltage acqusition via analog input.

Typcial set up is as below.

- 1.25 MSample/sec

- 400 samples/event

- Window trigger using the analog input (threshold 20~40 mV)

- test duration about 5 min.

-number of events: more than 1,000 throughour the test.

However as we found the rearm time of USB-6251 is long (~0.03 sec), we are planning to get a new DAQ board or digitizer.

The one we are interested in is PCI-6111.

Is there any way we can know how long the rearm time would be with PCI-6111 when test conditions is identical?

I wanted to get the numbers from its spec but couldnt find the number.

Thank you!

[Rscd27]

Hello skim151,

My name is Randy and I am an Applications Engineer at National Instruments. Can you please sent me a private message with your contact information that way I will create a Service Request and handle this issue by email or phone call.

I will like to know more about your application before give a recommendation.

[skim150]

Hi Randy

I have sent you a message with my email adress.

I will wait for your reply.

Thanks