Multisim and Ultiboard

cancel
Showing results for 
Search instead for 
Did you mean: 

Can anyone help me solve this convergence issue for my op-amp circuit?

Solved!
Go to solution
0 Kudos
Message 1 of 8
(5,280 Views)
Solution
Accepted by Hiesenberg1984

At a quick glance, it appears you have your power supplies reversed. VEE should be minus supply, VCC should be positive.

Message 2 of 8
(5,269 Views)

Can you quickly help me with this one also?

0 Kudos
Message 3 of 8
(5,232 Views)

I am not sure about what the issue could be but this post could be useful to resolve simulation erros:

 

http://digital.ni.com/public.nsf/allkb/A65253BD02F585CD86257A6B0049945D

Randy @Rscd27@
0 Kudos
Message 4 of 8
(5,180 Views)

If you go into the symbol properties, and turn on symbol pin names (see image). Then in schematic view the error becomes plainly obvious. The+ 20 and -20 are backwards (based on the voltages listed). I have not tested this, but I am sure that is the problem.

 

homewrk5A.PNG  homewrk5B.PNG

0 Kudos
Message 5 of 8
(5,177 Views)
0 Kudos
Message 6 of 8
(5,166 Views)

So do I need to repost in the other forum, or what? Or can the mods fix that? I would rather my time to answer the question not go to waste.

 

Thanks

0 Kudos
Message 7 of 8
(5,157 Views)

Is not necessary I did the comment to let him know that he should not duplicate forums! Leave your answer Here!

 

Warm Regards,

Randy

Applications Engineering

National Instruments

www.ni.com/support 

Randy @Rscd27@
0 Kudos
Message 8 of 8
(5,149 Views)