Pass / Fail step post action - option to retest step / fail step / abort sequence on fail.

[jimbobaggies]

Hi there....

In my main sequence there are a number of Pass / Fail steps, preceeding this an instruction telling an operator to connect cables etc.

What I would like to do;

If after executing a step the result is a Fail, we would like the option to retest, or, fail step and continue, or, abort  the sequence (incase of operator forgetting to connect a UUT correctly etc)

I'm a little out of my depth here in terms of how we could configure this in the "Step > Properties > Post Action" to give us these sort of options, or indeed if there is a different / better way of doing this altogether.

TIA.

Jim.

[~jiggawax~ · Accepted solution]

Do not use the Post Action.  There is a callback for this very thing.

This example demonstrates what you are looking for:

http://zone.ni.com/reference/en-XX/help/370052N-01/tsexamples/infotopics/callbacks_sequencefileposts...

Let me know if you have any quesitons about it.

Hope this helps,