NI TestStand

cancel
Showing results for 
Search instead for 
Did you mean: 

TestStand operator interface

I want to write a TestStand operator interface by LabVIEW, but it is too difficult to complete it by myself. So, I want a demo as a reference.

0 Kudos
Message 1 of 9
(6,491 Views)

Hi,

 

The source code for the TestStand User Interface (or Operator interface) is supplied with the TestStand installer.

Refer ( This is for TestStand 14 )

 

C:\Users\Public\Documents\National Instruments\TestStand 2014 (32-bit)\UserInterfaces\Full-Featured\LabVIEW\Source Code

 

Also look in the following folder for a simple Operator interface :

 

C:\Users\Public\Documents\National Instruments\TestStand 2014 (32-bit)\UserInterfaces\Simple\LabVIEW\Source Code

 

Use this as a starter.

 

Hope this helps.

 

Ravi

0 Kudos
Message 2 of 9
(6,488 Views)

Mathis_B created an API located here to help with the creation of Operator Interface in LabVIEW. I haven't personally used it but it might help. I agree that making a Operator Interface is no easy task nor for the faint of heart. I hope this helps. 

Now Using LabVIEW 2019SP1 and TestStand 2019
0 Kudos
Message 3 of 9
(6,476 Views)

There have been a few examples posted over the last few years that I would refer to:

 

http://www.ni.com/example/31148/en/

https://decibel.ni.com/content/docs/DOC-19686

http://www.ni.com/example/28608/en/

 

I'm not sure exactly what you want in your interface but hopefully the included examples along with these will be helpful.

 

Pulido Technologies LLC

0 Kudos
Message 4 of 9
(6,464 Views)

Thanks.

0 Kudos
Message 5 of 9
(6,457 Views)

Thanks a lot. Your answer is very helpful.

0 Kudos
Message 6 of 9
(6,450 Views)

I have downloaded the demo from http://www.ni.com/example/31148/en/, and run the SimpleUICode.VI in it. The Function of the VI is realized OK, but it always pops an error box as follows.  

 Error box.png

Do you have some solutions?

0 Kudos
Message 7 of 9
(6,392 Views)

That may not have been the best example to link to.  Here's a fixed version.  This is one of the simplest that I've found and if all you really want is the absolute bare minimum in a UI, this might fit.  In my experience though, it's likely that people may start to ask for a little more functionality and user friendliness.

 

In case you're curious, I had to fix a bug in the application manager control.  I also changed the Run event functionality so that it uses "TestUUTs" instead of running a selected sequence.

 

Pulido Technologies LLC

 

0 Kudos
Message 8 of 9
(6,353 Views)

Thank you very much!

0 Kudos
Message 9 of 9
(6,307 Views)