06-15-2013 12:40 PM
This is the team-mentor interaction space for all the NIYANTRA 2013 teams belonging to Group R. If your team belongs to this group,this is the place you should be interacting with your mentors.
Make Sure You Read this Document Carefully Before Starting.
This group is being mentored by Sonu Mahnot & Sumanth Hejjaji (National Instruments R & D)
06-16-2013 01:35 PM
Dear sir,
Glad to have you as mentor, let me give you a brief whats happening, we are working on non-invasive blood sugar measurement which we had alredy done it for final year project with diffrent harware and software(ardiuno) due to non availabilty of 2.12 nano meter wavelength IR-LED we had choosen commonly available 940nm led for our purpose and we had obtained results between not so satisfactory and satisfactory, means in certain region of blood sugar is detected well and in some bad.
So we require 2.12nm IR-LED and have no idea about NI controllers which support analog input with good A to D conversion, can we get these components for proceeding with the project. and also we are familiar with Lab VIEW to certain extent and detailed explaination why such LED should be used is provided in the abstract.
Thank you for sparing your time kindly acknowledge our request and provide us solution.
06-18-2013 03:26 AM
Sir, is it necessary that we use the products of NI or not; if so will they provide us with components like LDR,ultrasonic sensors etc. ? Will NI COMPACT RIO be given ?
If so at what cost?
06-21-2013 04:56 AM
Dear Sir,
We have written and tested our project with a arduino interface. We have a sketch which uses inbuilt arduino timer register and DAC.
Can these inbult registers be directly implemented as a VI ?
Is it nesseary to rebuilt these register representation in the VI?
If not how can we convert the register based sketch to the labview VI ?
Thank you
07-02-2013 09:16 AM
Hi, Sorry for the delayed response. Can u send us the abstract of ur project? That will help us understand what u r doing in greater detail and therefore help us answer ur questions better.
07-19-2013 11:49 AM
Hello Sir,
We are working on an autononous servilience robot,we need to take ur advise about the NI hardware being used and other NI toolkits which can help us in preparing our project.
We are attaching our abstract,it will help u to understand our project.
Reply as soon as possible.
Thankyou.
07-22-2013 07:50 AM
Hi Suraj,
I am going through the abstract.
As for hardware loaning, refer to the following document (if u havent already)
https://decibel.ni.com/content/docs/DOC-30191
Do u have any specific questions about NI hardware or software?
08-04-2013 03:51 AM
Hello Sir,
We have sent our hardware request to NI and in regard of our request, i had got reply mail in which they have suggested to give us NI Robotics starter kit for our project.
But,we have't get any reply from NI regarding the approval of our request or not.
When we got the requested hardware as the deadline of the project submission is near on 15th August,2013?
08-06-2013 12:44 PM
Dear sir,
I have simple doubt on programming on arduino board with lab view can you provide me your number or please call me to this no-9620155077..
please urgent...
Regards
subhash.R
08-08-2013 03:53 AM
Dear subhash,
internet has resouces regarding arduino and LV.
http://sine.ni.com/nips/cds/view/p/lang/en/nid/209835
https://decibel.ni.com/content/docs/DOC-15971
http://www.youtube.com/watch?v=RGRhIQneO6w
all the best