QuickSyn FSL0010

[AfgVD]

Hello,

I am using a QuickSyn FSL0010.
I manage to communicate with him via NI-MAX and the VISA test panel.

All commands work except those related to the RF output.
OUTP: STAT ON / OFF -> Does not change the RF output state
OUTP: STAT? -> Returns an error

This QuickSyn is integrated in an automatic test bench, so I must be able to use these commands

Anyone have an idea?

Thanks

[xuyoo]

Hello

You can use 02 command to get output state and use 0F01/0F00 to enable or disable the output, see detailed command description in attached screen shots.

Regards,

Frank

[AfgVD]

Hello,
Thank you for your reply.
But I don't want to use SPI commands
I need these functions but with SCPI commands

Regards,

Vincent

[xuyoo · Accepted solution]

Hi Vincent

These two commands also can be used as SCPI, you can try it as showed in attachment. Seems that commands OUTP: STAT ON / OFF and OUTP: STAT? are not supported on FSL-0010, we had the same situation before.

Regards,

Frank

[AfgVD]

Hi Frank,

OK, thanks. I'm not on site these days.
As soon as possible I will try

thanks again

Regards

Vincent

[AfgVD]

Hi Frank

It works with commands 0F01 / 0F00.

Thanks again for your help