Hi,
I have recieved confirmation that I have successfully re-imaged the cRIO.
I have installed the Labview, Driver Station, and Utillities updates today then ran all the tests.
I then ran the provided Servo Example code in the FRC examples link on the Labview Welcome screen and the servo worked perfectly.
Then I attempted my own code for motors (didn't work), then the provided Arcade Example (didn't work), and then the provided Motor Example code which did not require a joystick (didn't work).
The Code:
Each of the codes were set to the correct team IP.
Not sure if it was working right (but 2 of them were provided).
The on code configurations were correct,
The Robot:
The control wire was correctly inserted in the Victor and PWM 1 on the Digital Side Car.
The Victor had power.
I even tried 2 different Victors.
The Victor light keeps flashing orange.
Everything else seems to be communicating and wired correctly.
The Driver Station / Joystick:
Registering the joystick as beeing in USB 1.
No errors in the error log.
Getting code and enabling correctly.
Team number is displaying correctly.
Thanks,
Davis Catherman
