Cycle-Accurate Simulation with Xilinx ISim and sbRIO9606

[ShotSimon]

I tried to go through the tortorial on Cycle-Accurate Simulation with Xilinx ISim: https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000x5IICAY&l=en-US

When I get to the step to Execute Targets on Third party software it is grayed out.  Has anyone been sucessful doing this with a sbRIO9606?

Regards,

-SS

[ThiCop]

Hello Simon,

There seems to be something missing in the Tutorial:

http://zone.ni.com/reference/en-XX/help/371599G-01/lvfpgahelp/fpga_sim_configure_lv/ 

Did you do an Update of the FPGA Simulation Libraries?

Did you also try a restart of LabVIEW after doing this?

[ShotSimon]

Hi ThiCop,

Thanks for the response.

Tools»FPGA Module»Update Simulation Libraries, gives me a dialog that everything is OK.  Please see attached pngs.

I checked... and this directory path does seem correct and the ISIM directory is grayed out so I can't change it.

I also open and closed LabVIEW...any other ideas?

Regards,

-SS

[ShotSimon]

[ThiCop]

Do you get the same issue if you try to use ModelSim?

Can you upload your project files?