Field Point tool pallet missing

[antique]

I am running LabView 2011 on a XP PC connected to a cFP-1808, I have installed the Field Point drivers 6.0.9. When installing the drivers it said they were already installed. I can see the cFP-1808 in MAX. When I pull up the Start: Programs: National Instruments, field point does not show up. I cannot find any Field Point tool pallet. Now it has been a long time since I worked with field point and have a setup running now on LabView 7.1. Should Field Point show up in the tool pallet or is there a way that I can get this to work with 2011?

Thanks

Gerald

[Zach-H · Accepted solution]

There should have been a Field Point folder in the Start>>All Programs>>National Instruments directory. You could also check C:/Program Files/National Instruments/FieldPoint.

Does the Field Point driver show up in MAX? (It should appear like picture I attached illustrates)

If installed correctly you should see the Field Point VI's on the functions pallet as a sub pallet of the Measurement I/O pallet. 

From here it may be best to upgrade to the 6.0.10 Field Point driver. It should install itself over the 6.0.9 driver 

You can find 6.0.10 here.

[antique]

I have downloaded 6.0.10 and installing it now. It is taking forever to install. I will let you know on Monday what the outcome is.

Thank you

Gerald

[Zach-H]

Hey Gerald, was the 6.0.10 install successful? Does the Field Point pallet show up now? 

[antique]

Yes!  Updating to Fieldpoint 6.0.10 did the trick. I just tried it out and it works like a charm. Thank you for the help.