Im looking evaulation hardware to get trained in interfacing with labview. kindly suggest

[tej79]

Im looking for any Hardware (NI or third party Hardware) in which i can get trained with interfacing with hardware with different communication techniques like Can, I2c, as well 232 and 485.. and Few DAQ interface... So kindly let me know any such hardware from any vendor is available.. Kindly suggest.

[GITA_A]

Hi Tej,

See this http://digital.ni.com/public.nsf/allkb/2CC025149A5EC545862571BD004F0A22

Also NI-DAQmx Simulated Device

[Wire_Warrior]

The best place to start would probably be the NI LabVIEW Basics 1 & 2 courses.  They cover some of these concepts.  You can find out more at http://www.ni.com/training.  Other wise if you search the knowledge base on the NI Developer Zone you can find tutorials for lots of hardware bus interfaces, like this one on the CAN bus.

Jason

[tej79]

Thanks Geetha and jason...for your valuable reply...