LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

LabVIEW (and other NI software products) Roadmap 2023 Q1

Solved!
Go to solution

{Updated thread October 2024}

 

Thank you everyone for the feedback on these product roadmaps.  Going forward, public roadmaps for NI's software are now posted on the "Software Roadmaps" section of NI.com found here:https://www.ni.com/en/shop/software-portfolio/software-roadmaps.html

 

This site, as it calls out, will be updated quarterly, by the product managers that drive the roadmaps for these product line. 

 

 

Eric Reffett | Director, Product Management | 1.512.683.8165 | ni.com
Message 1 of 35
(10,255 Views)

I might just be missing it but I don't see the survey or anything interactive about the roadmap. I see the PDF link though. Perhaps it's getting blocked in my browser or something. Where should the survey link be?

0 Kudos
Message 2 of 35
(10,121 Views)

In the last version, there is one term, 'Dynamically create controls at runtime'. 

Why delete it?

Message 3 of 35
(10,073 Views)

Bert,

 

We added the survey link directly into the PDF.  Its in this section on the roadmap:

EricR_0-1681481991782.png

 

This is the direct URL link that clicking that "Take the Survey" button links to: https://survey.ni.com/jfe/form/SV_9oGjiLIKqpqSP0q

 

Eric Reffett | Director, Product Management | 1.512.683.8165 | ni.com
0 Kudos
Message 4 of 35
(9,998 Views)

It was a feature that was in LabVIEW NXG that augmented some of the runtime workflows.  Originally our intention was to bring this feature into LabVIEW as well.  Its still possible that we would do this at some point, but so far in our surveys and user engagements, it hasn't come up as being something that impactful so we have removed it from our near-term roadmap in favor of other work that users were asking us for.

 

Eric Reffett | Director, Product Management | 1.512.683.8165 | ni.com
0 Kudos
Message 5 of 35
(9,991 Views)

Thanks Eric, I was looking for it on the website.

 

I'm sad to see dynamically created controls is gone as well. I'm hoping the Datagrid control scratches that itch somewhat.

0 Kudos
Message 6 of 35
(9,968 Views)

Thanks,  Eric.

On the contrary to "Wife's wiser", the users are not always right. 

🙂 

0 Kudos
Message 7 of 35
(9,913 Views)

The roadmap shows that "Driver version independence from LabVIEW" is complete but the table here: https://www.ni.com/en-us/support/documentation/supplemental/22/extending-compatibility-between-labvi... shows that not all drivers support independence. The NI updates on this topic has been very misleading for end users and doesn't give a good idea of when the whole driver suite would be independent. Any updates on this topic that can provide some clarity?

0 Kudos
Message 8 of 35
(9,141 Views)

you must learn the basics of marketing and how multibillionz multinationalz managerz operate

Message 9 of 35
(8,304 Views)

@Konan__ wrote:

you must learn the basics of marketing and how multibillionz multinationalz managerz operate


Most of us already understand this.  We just don't like it.

Bill
CLD
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.
Humble author of the CLAD Nugget.
Message 10 of 35
(8,283 Views)