Problem with cmw290

[Maria14]

Hi,

I'm working on test GSM using Crio 9030 and cmw290.

my problem is that my VI work correctly with LabVIEW (0 error),

but when I call my VI in LabVIEW RT, I found a problem in "rscmwgs_configure_connection_circuit_switched", in the picture below there's the code error.

[mtwar]

Hello,

How are you deploying your application to cRIO? Definitely it is a problem of deployment settings because some VI isn't available on cRIO target. Here you can find nice instruction how to do it:

http://www.ni.com/pdf/products/us/criodevguidesec5.pdf

Hope this can help, if not we will try to figure it out somehow.

Marcin

[Maria14]

Actually I did my application under windows then I added it under Crio, I deployed all... So LabVIEW RT could see m'y application but I didn't build a realtime application like it's seem in thé document u gave to me.

[Maria14]

the problem persiste! 😞 

[mtwar · Accepted solution]

I've missed from your first post that you are using rhode & schwarz equipement.

Have you maybe tried this description?

http://cdn.rohde-schwarz.com/pws/dl_downloads/dl_application/application_notes/1ma228_instruments_la...

Go to the page 43 and follow the instructions there - it should help!

Please, let me know whether it has helped you.

Marcin