Question USB 6009 DAQmx

[Saille]

Sorry for having created two topics.

But I'm in need of an orientation.

Could someone guide me, please

http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/Help-DAQmx-and-USB-6009/m-p/3088850

[nyc_(is_out_of_here)]

---

@Saille wrote:

Sorry for having created two topics.

But I'm in need of an orientation.

Could someone guide me, please

http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/Help-DAQmx-and-USB-6009/m-p/3088850

---

It is bad form to post the same question to multiple forums.

You have already received two very helpful answers from crossrulz and Sam_Sharp.

[Sam_Sharp]

In his defence, I only saw the other thread because he posted this one. While I wouldn't encourage multiple posts and would always recommend that you post in the most appropriate board for your topic, I tend to only check the 'LabVIEW' board.

[nyc_(is_out_of_here)]

---

@Sam_Sharp wrote:

In his defence, I only saw the other thread because he posted this one. While I wouldn't encourage multiple posts and would always recommend that you post in the most appropriate board for your topic, I tend to only check the 'LabVIEW' board.

---

If you look at the time stamps on the two posts, you will see that he posted the same question on the LabVIEW board *after* you replied to his other post.

Apparently either your detailed answer wasn't satisfactory or he didn't understand your answer and thought that repeating the question yet again will yield a different outcome.

[Saille]

Sam_Sharp

Thank you for your answer on my problem. I changed these points of the program.

thank you for help.