LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

What is the best way to connect PumpWorks to Labview? DDE or OPC

Solved!
Go to solution

What is the best way to connect quizix PumpWorks to labview?

PumpWorks share data using Dynamic Data Exchange (DDE),what is the best way? To use an OPC Server betwen labveiw and pumpworks or  DDE?

0 Kudos
Message 1 of 5
(3,599 Views)

Hi.

 

If the instrumet can communicate with an OPC server I think both methods are fairly equal.

There is a chance that you might have to reinstall LabVIEW without OPC server if you choose DDE, as it is known that it might conflict with the DDE server.

 

http://zone.ni.com/devzone/cda/tut/p/id/4531

http://zone.ni.com/devzone/cda/tut/p/id/7450

 

-Tom

0 Kudos
Message 2 of 5
(3,582 Views)

The PumpWorks program can only use DDE communication linkl: http://www.vindum.com/Q%20PumpWorks%20Manual031306.pdf 

The question is: What is the best way to connect the program with labview, use DDE or use for example Kepware OPC Server that can communicate with both systems. 

 

Thank you for your answer!

 

0 Kudos
Message 3 of 5
(3,577 Views)
Solution
Accepted by topic author A3ea

If the program only handles DDE communication the best method will be via DDE, as LabVIEW handles this. Otherwise you will have to add another instance to the system(OPC Server) that will make it more complex, and causes more overhead.

 

See the previous link under "Using LabVIEW as a DDE Client".

 

-Tom

0 Kudos
Message 4 of 5
(3,564 Views)

Thanks Tom!

0 Kudos
Message 5 of 5
(3,562 Views)