I am trying to cennect to an Manta camera from Allied Vission using National Instruments software. The camera works perfectly fine with the VIMBA software provided by the camera manufacturer. I also got it working with MatLab. The camera name is properly shown in both LabView and NI MAX; in NI MAX, it apears with an "x". When I try to use the camera with IMAQdx, it gives me error messges. In Labview gives me the error: "NI-IMAQdx: (Hex 0xBFF69001) Internal error" In MAX gives me the error: "error 0xbfff800b The session for your device could not be configured" I already look in the forum and NI support page for possible solutions. I updated the camera firmware and followed the driver configurations as suggested by NI and Allied Vission instrucctions. I also run the CameraValidator.exe, but I do not find the report file. I must be missing something. I will really apreciate some help with this, Aaron

Machine Vision

error when connecting to Allied vission Manta

First your question could be related to this error, but now i feel it is completely different so start new thread.
Because the IMAQdx session you are not passing it to subVI and hence error. Please check here how to create subvi and setup the controls and indicators as terminals: http://www.ni.com/white-paper/7593/en/

Thanks
uday