03-10-2003 07:04 AM
03-11-2003 02:32 PM
03-12-2003 05:01 AM
05-21-2007 01:09 PM
Hi expert..
i am using a PI (Physik Instrumente) slider M410 DG and the controller C-860.10, for my research but i need to give a motion in Labview 7.0.
is that any tutorial or example program in Labview to control the slider please..
many thanks,
05-27-2015 07:22 PM
Did you ever find a driver for the motor controller? I am using C-843, but I can not find the LabView support vi's discussed in PI documents only the PI Update Finder.
Thanks,
Sarah
05-28-2015 09:21 AM
05-28-2015 10:11 AM
I did. I made a new post because this one didn't provide very much useful info and it is eight years old. If you have anything to contribute I greatly appreciate it though!
Respectfully,
S
06-06-2015 11:36 PM
Hi,
Could anyone let me know if I need to instal a driver for controlling PI (Physik Instrumente) DC motor model C-862 (through RS232) using Labview?
Also could anyone provide guidelines to write Labview code for the motion control?
Thank you very much in advance.
Regards,
Raj.
07-02-2021 10:55 AM
Was looking for the same thing. I contacted them and they sent me files for the E 710 controller. I don't know if i'm allowed to share though ? Maybe ask them if you need. Or MP me
Some controllers such as the E662 do not have driver and are only controlled by RS232 cable and SCPI commands. PI propose Piterminal for this. I wonder if communicating with the Serial port in Labview can do the same...
07-02-2021 11:03 AM - edited 07-02-2021 11:06 AM
Here is some VI to communicate with the RS232 port