Re : Error 200220 with CRIO 9081 and DAQ modules

[vincentlg]

Hello,

I'm trying to use a CRIO 9081 with the modules NI9206. Max recognize the chassis but not the module.

When i try to add a DAQ associated to the NI9206 in Veristand, the error message 200220 it appears.

I was careful to use the same hardware names under MAX and Veristand but it does not work.

Do you have an idea to resolve the problem ? 

[stockson]

Hi vincentlg,

and how are you accessing the channels? Do you use a task or you access the physical channels directly?

[vincentlg]

Hi,

I try to access the physical channels directly, juste by adding a DAQ in the system explorer to get an analogic input.

The modules are connected but Veristand but he mentions that the device is invalid...

[stockson]

And is the project properly configured?

You can see the guidelines here (most important is the OS and IP): https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000x2CvCAI&l=en-US#toc2

[vincentlg · Accepted solution]

I find the solution, finaly it was necessary to add a custom device to scan for new engine and to detect the modules. Then it's possible to interact with modules.

Thank you for your help !

[stockson]

Great!

Have fun 🙂