NI 6133 Analog Input starting with external Trigger?

[Pandi]

I want to start an analog input with extern start trigger on my Multifunction DAQ 6133.

I have connected the right analog input channel to the trigger signal (all analog input channels are assisted for Starttrigger as it is in the manual), but I always get the errormessage -200625 (DAQmxErrorInvalidAnalogTrigSrc).

What must I do to avoid this error?

[Andre_Saller]

Please attach your VI or a screenshot at least, so that we can see how you configured your hardware. Which channel have you set asd the source of the trigger, because this seems to be invalid?

[Pandi]

Thanks, but i solved this Problem by myself. It was the wrong Hardware configuration.

[ckang]

I have the same problem. Same hardware of 6133 also, with bnc-2110. I want to capture a signal from channel ai0 using an external trigger source which is connected to PFI0. I doubt its my code as it is quite similar to the examples 204226.vi and 200007.vi supplied by the NI website, I always get the same error of Invalid Analog Trigger Source from all 3 VIs.

Anyone?

[reddog]

The 6133 doesn't support analog triggering with a PFI pin as the source.  It only supports analog triggering with an AI channel from the task as a source.  If you want to use PFI as the trigger source, you can only perform digital triggering.  I hope this helps.