Size of Shielding screws for SCB-68

[bnall]

What is the size of the "shielding screws" for the cover of the SCB-68

(I've lost the original ones and need to replace them.)

[Rémi M]

Hello,

These screws have a 2.5mm  diameter. (same as the connector screws) and are about 4mm long.

Regards,

[bnall]

Thanks for your response.

So if the diameter is about 2.5 mm, I'm assuming they are a #3 screw? Can you tell me if it is a coarse or fine thread (#3-48 or #3-56)?

A mechanical engineer at NI should be able to pull up a drawing for the box...

[Rémi M · Accepted solution]

Please find attached some datasheets and drawing of the SCB-68.

You should be able to find the details you need based on these docs.

Have a nice day,

Message Edited by Support on 10-01-2009 11:19 AM

[bnall]

Thank you. This is exactly the information I needed.

[Seth_B.]

For those who need this in the future, the screw is a 4-40 x 1/4,Phillips Head, SS, w/ integrated washer.