how do i deal while acquiring data rising ni9237

[ismailel]

Hi everybody,

I created under matlab a code that acquire data from four gauges fixed to a beam using NI9237, the aim of my code is to estimate the applied force to the beam, my problem is that at the in the end of acquisition i get the expected force devided by 10(7000N rather than 70000), i am pretty sure that the problem comes form the NIdevice, does any one of you have a suggestion?

Yours Faithfully.

 

[ismailel]

Hi everybody,

I created under matlab a code that acquire data from four gauges fixed to a beam using NI9237, the aim of my code is to estimate the applied force to the beam, my problem is that at the in the end of acquisition i get the expected force devided by 10(7000N rather than 70000), i am pretty sure that the problem comes form the NIdevice, does any one of you have a suggestion?

Yours Faithfully.

[Jovan.N]

Hello ismailel,

You can test your device using NI MAX by following this tutorial:

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000YGZPCA4&l=en-US

Last version of MAX:

https://www.ni.com/en/support/downloads/drivers/download.system-configuration.html#307147

Best regards,

[ismailel]

Hi,

Thank you for your reply, what i've done is i that i created a task to calibrate the channels and the results were good but now that it's done i need to know how to apply this calibrations in real channels  so i can get data corectly???

Thanks