Multisim and Ultiboard

cancel
Showing results for 
Search instead for 
Did you mean: 

layer stack-up report empty?

 

This may be a bug.   My UB export layer stack-up report is empty except for a header and sometime almost a few characters of some layer names.

 

This is what I get:

----------

 

Ultiboard Information Export File

Design Name  : Power Dist Board-1082-0_01 - Layer stack-up
Report Date  : 29 March 2016
Report Time  : 18:25
--------------------------------------------------------------------------------

 

That's the full file content.

 

UB14.0.1, Win10 64b

0 Kudos
Message 1 of 6
(4,397 Views)

Can you describe the process that you are following to create the stack-up report? Is this happening with other files?

Randy @Rscd27@
0 Kudos
Message 2 of 6
(4,380 Views)

Just click on export and select the layer stackup report check box, text option.  I also check for gerbers, dxf and various other reports as well.

 

This is a 6 layer design, with the standard silkscreen and solder/paste masks.

 

The board statistics text report looks fine.

 

Here is another try in which part of some layer info made it into the report, then no more:

 

---------------------------------------------------------------------------------------------------------------

 

Ultiboard Information Export File
Design Name  : Power Dist Board-1082-0_01 - Layer stack-up
Report Date  : 21 March 2016
Report Time  : 14:00
--------------------------------------------------------------------------------

Copper Top       

Signal           
T   

0 Kudos
Message 3 of 6
(4,372 Views)

Hello dbur,

 

I use one of the examples that is shipped with NI-Ultiboard named Iint4lRouted.ewprj, the examples are usually located in C:\Users\Public\Documents\National Instruments\Circuit Design Suite 14.0\samples

 

Remember to open the file directly from Ultiboard.

 

This is a simple design with Copper Top, 2 inner layers and Copper Bottom.

 

Screenshot_1.jpg

 

I proceed to generate the report in a .txt file

 

Screenshot_2.jpg

 

Then I reviewed the exported file: 

 

Screenshot_3.jpg

 

And it seems to be correct. Based on the Ultiboard User-Manual:

 

http://www.ni.com/pdf/manuals/374488a.pdf (Check Page 8-16)

 

Screenshot_4.jpg

 

It seems that is showing the correct information. I believe that you must try this example and verify if the report is generated correctly. If you can generated correctly it could mean that there is a corruption of your project or a bug. Can you attach your project to test it?  

 

Warm Regards,

 

Randy

Applications Engineering

National Instruments

www.ni.com/support  

Randy @Rscd27@
0 Kudos
Message 4 of 6
(4,361 Views)

Yes I got that result on the sample file.  I cannot post my file here because it is customer proprietary.

 

I tried a much earlier version and it had the same problem.

 

I tried several entirely different old designs and they also had the same problem.

 

I tried a design file from someone else and it did work.

 

----

 

OK, I think I found the issue.  The report does not generate correctly if you don't have all the layers hard selected first in the design toolbox.

 

I believe this should be an error.  The layers exist and should be properly reported, whether they are enabled in the Design Toolbox for viewing or not.

0 Kudos
Message 5 of 6
(4,349 Views)

Hello,

 

I am glad that now is working. Please post that request in the idea exchange forum and request that feature for next Multisim versions. The R&D department usually monitore this forum:

 

http://forums.ni.com/t5/Multisim-and-Ultiboard-Idea/idb-p/multisimideas

 

If you have more questions let us know.  

 

Warm Regards,

 

Randy

Applications Engineering

National Instruments

www.ni.com/support 

Randy @Rscd27@
0 Kudos
Message 6 of 6
(4,341 Views)