LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

how do I discart the firsts sample readings of my NI and plot the rest in a graph

Run your VI until the graph contains data. Stop the vi, right click the graph terminal and select "create constant". Save the vi and attach it here.

0 Kudos
Message 11 of 22
(780 Views)

Here it is,
Sorry that it took so long, I had a problem with my pressure transducer.

Hope you can still help me.

What I really want to do is match a cycle of pressure with a cycle of the cossine function in a way that the first value of the pressure is the minimum value of the wave.

0 Kudos
Message 12 of 22
(757 Views)

Your diagram constant is empty. Did you run the VI before creating the constant?

0 Kudos
Message 13 of 22
(753 Views)

Yes I did.
I run it, clicked on creat -> constant on the  XYgraph exit (at block diagram) then saved it.

0 Kudos
Message 14 of 22
(751 Views)

Right-click on the xy graph terminal labeled "PV diagram" (all the way on the right), not elsewhere. Then make sure the diagram constant is NOT empty.

0 Kudos
Message 15 of 22
(744 Views)

Here it is.

0 Kudos
Message 16 of 22
(739 Views)

Here's how to discard the points up to the maxY.

 

 

(Of course all you need to do is retain the second plot)

Download All
0 Kudos
Message 17 of 22
(731 Views)

This is great.
But it isn`t what I really need.
I need to obtain the data after the maximum point of the pressure (waveform graph)
My PV diagram should have an oval shape.

0 Kudos
Message 18 of 22
(725 Views)

I want the circled data to go to the PV diagram

0 Kudos
Message 19 of 22
(723 Views)

What is the t0 and dt for the graph? You need to set that, then just wire the waveform graph as indicated.

0 Kudos
Message 20 of 22
(722 Views)